 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Mast Boots |
|
|
|
|
| Mast Boots | ||
|
Mast Boots are used on keel-stepped Rigs to help prevent water leakage where the Mast goes
through the Deck. They fit around the Mast and cover the Deck Collar flange and Mast
Wedges.
Mast Boots are designed to be put on the mast prior to stepping. They can be installed on a stepped
mast by making a vertical cut on the aft side, which can be glued or taped over afterwards, but
obviously this method compromises its' integrity. See also,
Deck Collars,
Mast Wedges,
Mast Boot Clamps,
and Mast Boot Tape.
Rig-Rite stocks a large selection of Mast Boots. Kenyon Mast Boots are listed on individual Mast Section pages, See Kenyon Mast Sections. Isomat Mast Boots are listed on individual Mast Section pages, See Isomat Mast Sections. 'Universal' Mast Boots are listed below, See Universal Mast Boots. Mast Boots for Sections not listed elsewhere on-site are shown below,
If none of the Mast Boots available are suitable for your application, we also have a variety of Mast Boot Tapes available. While not as durable or long-lasting as a real Mast Boot, they offer the adaptability to fit almost any application, but must be replaced every time the Mast is unstepped. See: Mast Boot Tape. Stainless Steel Mast Boot Clamps used to secure the Mast Boot to the Mast, and to the Deck Collar are available separately. See: Mast Boot Clamps. If you require a Mast Boot not listed here, please forward details on your Mast Section
(See, Identifying your Spar
Section),
and a tracing of your Deck Collar (the part the Mast Boot fits over) with measurements
including
circumference, and full details of the part, boat model and year.
|
||
|
|
||
| 'Universal' Mast Boots | ||
|
Soft molded PVC Mast Boots are 'stepped' to fit a
wide range of Mast Sections. Simply cut the Boot at the smallest 'step' that will fit over
the Mast Section, and at the smallest 'step' that will fit over the Deck Collar. All
'Universal' Mast Boots come with a special cement for use in installing on stepped Masts.
These units are especially useful for situations where the Mast cannot be unstepped and are
also frequently used to cover Mast Boot Tape.
|
||
|
Universal Boot for Masts w/ Collars to 31" in Circumference: PP-MBU1: Universal Mast Boot fits Mast Sections larger than 17 1/2" in Circumference, and Deck Collars up to 31" in Circumference. Soft molded white Universal Mast Boot includes adhesive to cement seam when installing on stepped Masts.
|
||
|
Universal Boot for Masts w/ Collars to 37" in Circumference: PP-MBU2: Universal Mast Boot fits Mast Sections larger than 23" in Circumference, and Deck Collars up to 37" in Circumference. Soft molded white Universal Mast Boot includes adhesive to cement seam when installing on stepped Masts.
|
||
|
Universal Boot for Masts w/ Collars to 44" in Circumference: PP-MBU3: Universal Mast Boot fits Mast Sections larger than 30" in Circumference, and Deck Collars up to 44" in Circumference. Soft molded white Universal Mast Boot includes adhesive to cement seam when installing on stepped Masts.
|
||
|
|
||
| Mast Boots - for Round Masts | ||
| Molded PVC Mast Boots to fit a variety of Round Masts and
specific Deck Collar combinations. Common on Freedom and Nonsuch Yachts, and in other
applications. |
||
|
Mast Boot for 5" OD Round Mast: PP-RM5MB: Special Round Mast Boot to fit 5" OD Round Mast and 6" OD Round Deck Collar. Soft molded black Mast Boot is 3 1/4" high x 5" ID. As used on Pearson 23C.
| ||
|
Mast Boot for 5 1/2" OD Round Mast - Freedom 21: PP-RM5.5MBF: Special Round Mast Boot to fit 5 1/2" OD Round Mast and 9" OD Round Deck Collar. Hard molded black Mast Boot is 2 1/2" high x 5 1/2" ID. As used on Freedom 21. *** Special Round Mast Collar Wedge to fit Freedom 21 (PP-F25572MC) is also available. Special molded Urethane Mast Collar/Wedge is 6 5/8" OD x 5 3/8" ID x 2 3/8" high and fits between the Mast and the Deck Collar. TP-F25443MB
|
||
|
Mast Boot for 6 1/2" OD Round Mast: PP-RM6.5MB: Special Round Mast Boot to fit 6 1/2" OD Round Mast and 8 1/2" OD Round Deck Collar. Hard molded white PVC Mast Boot is 3 1/4" high. As used on Nonsuch 22.
|
||
|
Mast Boot for 8" OD Round Mast: PP-RM8MB: Special Round Mast Boot to fit 8" OD Round Mast and 10 1/2" OD Round Deck Collar. Hard molded white PVC Mast Boot is 3 1/4" high. As used on Nonsuch 26.
|
||
|
Mast Boot for 9 3/4" OD Round Mast: PP-RM9.75MB: Special Round Mast Boot to fit 9 3/4" OD Round Mast and 12" OD Round Deck Collar. Hard molded white PVC Mast Boot is 3 1/4" high. As used on Nonsuch 30.
|
||
|
Mast Boot for 11" OD Round Mast: PP-RM11MB-N: Special Round Mast Boot to fit 11" OD Round Mast and Nonsuch Round Deck Collar. Hard molded white PVC Mast Boot is 14" OD x 3 1/4" high. As used on Nonsuch 33, and 36.
|
||
|
Mast Boot for 11" OD Round Mast: PP-RM11MB-F: Special Round Mast Boot to fit 11" OD Round Mast and Freedom "D" (12 3/8" OD) Round Deck Collar. Soft molded white PVC Mast Boot is 12 1/2" OD x 3 1/4" high. As used on Freedom 36. no Ear
|
||
|
Mast Boot for Freedom 28 Mast: PP-RM-F26704MB: Special Round Mast Boot to fit Round Mast and Freedom "A" Round Deck Collar. Soft molded white Rubber Mast Boot is 4 3/4" high. As used on Freedom 28. MMM
|
||
|
|
||
| Mast Boots - Miscellaneous | ||
|
Hard molded PVC Mast Boots to fit a variety of specific Mast Section and Deck Collar combinations.
|
||
|
|
||
|
Mast Boot for Annapolis Spars 6641 Mast Section: AS 6641MB: Mast Boot to fit Annapolis Spars 6641 (6 5/8" x 4 1/8") Diamond-shaped Mast Section and AS 66-80M-DC Cast Deck Collar. Hard molded white PVC Mast Boot is 3 1/4" high x 9 1/4" long x 6" wide. secm
|
||
|
Mast Boot for Annapolis Spars 7446 Mast Section: AS 7446MB: Mast Boot to fit Annapolis Spars 7446 (7 3/8" x 4 5/8") Diamond-shaped Mast Section and AS 66-80M-DC Cast Deck Collar. Hard molded white PVC Mast Boot is 3 1/2" high x 9 1/2" long x 6" wide. secm
|
||
|
Mast Boot for Annapolis Spars 8050 Mast Section: AS 8050MB: Mast Boot to fit Annapolis Spars 8050 (8" x 5") Diamond-shaped Mast Section and AS 66-80M-DC Cast Deck Collar. Hard molded white PVC Mast Boot is 3 1/2" high x 9 1/2" long x 6" wide. secm
|
||
|
Mast Boot for Annapolis Spars 8553 Mast Section: AS 8553MB: Mast Boot to fit Annapolis Spars 8553 (8 1/2" x 5 3/8") Diamond-shaped Mast Section and AS 85-88M-DC Cast Deck Collar. Hard molded white PVC Mast Boot is 2 1/2" high x 11" long x 7 1/2" wide. w/tabsecm
|
||
|
Mast Boot for Annapolis Spars 8855 Mast Section: AS 8855MB: Mast Boot to fit Annapolis Spars 8855 (8 7/8" x 5 1/2") Diamond-shaped Mast Section and AS 85-88M-DC Cast Deck Collar. Hard molded white PVC Mast Boot is 3 1/2" high x 11" long x 7 1/2" wide. secm
|
||
|
Mast Boot for Annapolis Spars 9457 Mast Section: AS 9457MB: Mast Boot to fit Annapolis Spars 9457 (9 3/8" x 5 3/4") Mast Section and special Cast Deck Collar. Hard molded white PVC Mast Boot is 12" long x 7 1/4" wide x 2 1/2" high. MMM
|
||
|
|
||
| Mast Boot for C&C Yachts w/ 7 5/8" x 4 5/8" Mast Section: CC MB-7646DM: | ||
|
Mast Boot to fit C&C Yachts with 7 5/8" x 4 5/8" Diamond-shaped Mast Section and special
C&C Deck Collar. Hard molded white PVC Mast Boot is 2 3/4" high x 12" long x 6 5/8" wide.
|
||
| Mast Boot for C&C Yachts w/ 9 1/8" x 5 3/8" Mast Section: CC MB-9154DM: | ||
|
Mast Boot to fit C&C Yachts with 9 1/8" x 5 3/8"
Diamond-shaped Mast Section and special C&C Diamond-shaped Deck Collar.
Hard molded white PVC Mast Boot is 3 1/2" high x 12 3/4" long x 7 1/2" wide.
As used on C&C 36, some 39's and others.
|
||
| Mast Boot for C&C Yachts w/ Offshore Spars 6640 Mast Section: CC MB-OS6640DC: | ||
|
Mast Boot to fit C&C Yachts with Offshore Spars 6640 flat-back Mast Section (6.6" x 4.0")
and special C&C Diamond-shaped Deck Collar. Hard molded white PVC Mast Boot is 2 1/2"
high x 10 1/2" long x 6 3/4" wide. As used on later C&C 30's.
|
||
| Mast Boot for C&C Yachts w/ Offshore Spars 8453 Mast Section: CC MB-OS8453DC: | ||
|
Mast Boot to fit C&C Yachts with Offshore Spars 8453 flat-back Mast Section (8.44" x 5.3")
and special C&C Diamond-shaped Deck Collar. Hard molded white PVC Mast Boot is 2 3/4"
high x 12 3/4" long x 7 1/2" wide. As used on C&C 38C, later 39's, and the 41R.
|
||
|
|
||
| Mast Boot for Catalina 36 w/ Schaefer Spars #221 Mast Section: Sch 220M-MB: | ||
|
Mast Boot to fit Schaefer Spars 220 & 221 Mast Sections (8.55" x 5.4") and
Sch 55-48XQ Cast Deck Collar. Hard molded white PVC Mast Boot is 2 3/4" high
x 10 3/4" long. As used on some Catalina 36's. DUP Entry
|
||
| Mast Boot for Catalina 36 w/ Schaefer Spars #221 Mast Section: Sch 220M-MBE: | ||
|
Mast Boot to fit Schaefer Spars 220 & 221 Mast Sections (8.55" x 5.4") and special Cast Deck
Collar with ears. As used on some Catalina 36's. DUP Entry
|
||
|
Mast Boot for Catalina 38 w/ OM4C Mast Section: Cat 38L-MB: Mast Boot to fit Catalina 38 special Deck Collar and OM4C Flat Oval Mast Section (9 1/2" x 5"). Hard molded white PVC Mast Boot is 2 5/8" high x 11" long. As used on some Catalina 38's.
|
||
|
|
||
|
Mast Boot for Famet 6837 Flat Oval Mast Section: Fam 6837M-MB: Mast Boot to fit Famet 6837 Flat Oval Mast Section (6 3/4" x 3 3/4") and Cast Deck Collar. Hard molded white PVC Mast Boot is " high x " long.
|
MMM | |
|
Mast Boot for Famet 8545 Flat Oval Mast Section: Fam 8545M-MB: Mast Boot to fit Famet 8545 Flat Oval Mast Section (8 1/2" x 4 1/2") and Cast Deck Collar. Hard molded white PVC Mast Boot is " high x " long.
|
MMM | |
|
Mast Boot for Famet 8747 Flat Oval Mast Section: Fam 8747M-MB: Mast Boot to fit Famet 8747 Flat Oval Mast Section (8 3/4" x 4 3/4") and Cast Deck Collar. Hard molded white PVC Mast Boot is " high x " long.
|
MMM | |
|
Mast Boot for Famet 9550 Flat Oval Mast Section: Fam 9550M-MB: Mast Boot to fit Famet 9550 Flat Oval Mast Section (9 1/2" x 5") and Cast Deck Collar. Hard molded white PVC Mast Boot is 2 5/8" high x 11" long. DUP Entry Cat
|
||
|
|
||
|
Mast Boots for Hall Spars Mast Sections In addition to their proprietary Mast Sections, Hall Spars has used a variety of Schaefer Spars Mast Sections. See Mast Boots for Schaefer Spars Mast Sections, below. |
||
|
Mast Boot for Hall Spars HS 128 Mast Section: HS-128MB: Mast Boot to fit Hall Spars HS-128 Mast Section (5" x 3.19") and standard Cast Deck Collar. Hard molded white PVC Mast Boot is 2" high x 6 3/8" long. As used on J/27 and others.
|
||
|
Mast Wedge Set for Hall Spars HS 128 Mast Section: HS-128MWS: Mast Wedge Set to fit Hall Spars HS-128 Mast Section (5" x 3.19") and HS Cast Deck Collar. Original extruded White Vinyl Mast Wedge Set includes (2) 2 1/4", and (2) 4" long pieces. As used on J/27 and others.
|
||
|
Mast Boot for Hall Spars HS 152 Mast Section: HS-152MB: Mast Boot to fit Hall Spars HS-152 Mast Section (6" x 4") and standard Cast Deck Collar. Hard molded white PVC Mast Boot is 2" high x 8" long. As used on J/28, Frers 30, and others.
|
||
|
Mast Boot for Hall Spars HS 166 Mast Section: HS-166MB: Mast Boot to fit Hall Spars HS-166 Mast Section (6.50" x 4") and HS-PR8327 Cast Deck Collar. Hard molded white PVC Mast Boot is 2 1/2" high x 8 3/4" long. As used on Frers 33, J/34, and others.
|
||
|
|
Mast Wedge Set for Hall Spars HS 166 Mast Section: HS-166MWS: Mast Wedge Set to fit Hall Spars HS-166 Mast Section (6.50" x 4") and HS-PR8327 Cast Deck Collar. Original extruded White Vinyl Mast Wedge Set includes (2) 3", and (2) 6" long pieces.
|
|
|
Mast Boot for Hall Spars HS 202 Mast Section: HS-202MB: Mast Boot to fit Hall Spars HS-202 Mast Section (8" x 4.24") and standard Deck Collar. Hard molded white PVC Mast Boot is 2" high x 10" long.
|
||
|
Mast Boot for Hall Spars HS 237 Mast Section: HS-237MB: Mast Boot to fit Hall Spars HS-237 Mast Section (9.313" x 5.076") and HS-PR8327 Cast Deck Collar. Hard molded white PVC Mast Boot is 3" high x 11" long. As used on J/44.
|
||
|
Mast Boot for Hall Spars HS 5890 Mast Section: HS-5890MB: Mast Boot to fit Hall Spars HS-5890 Mast Section (9.0" x 5.875") and Special Cast Deck Collar. Hard molded white PVC Mast Boot is 12" long x 8 1/2" wide x 2" high. 5
|
||
|
|
||
|
Mast Boot for Metal Mast 5838P Performance Section: MMP-5838PMB: Mast Boot to fit Metal Mast 5838P Performance Mast Section (5.8" x 3.8") and special fabricated Deck Collar. Hard molded white PVC Mast Boot is 3 1/2" high x 8 1/2" long.
|
||
|
Mast Boot for Metal Mast 6342P Performance Section: MMP-6342PMB: Mast Boot to fit Metal Mast 6342P Performance Mast Section (6.3" x 4.2") and special fabricated Deck Collar. Hard molded white PVC Mast Boot is 3 1/2" high x 8 1/2" long.
|
||
|
Mast Boot for Metal Mast 7953P Performance Section: MMP-7953PMB: Mast Boot to fit Metal Mast 7953P Performance Mast Section (7.9" x 5.3") and special fabricated Deck Collar. Hard molded white PVC Mast Boot is 3 1/4" high x 10 1/4" long x 7 1/2" wide.
|
||
|
|
||
|
Mast Boot for Metal Mast 7244 Oval Section: MMO-7244MB: Mast Boot to fit Metal Mast 7244 Oval Mast Section (7.20" x 4.41") and special Pearson Cast Deck Collar. Hard molded white PVC Mast Boot is 2 3/4" high x 9 1/4" long. As used on Pearson 28-2.
|
||
|
Mast Boot for Metal Mast 8655 Oval Section: MMO-8655MB: Mast Boot to fit Metal Mast 8655 Oval Mast Section (8.6" x 5.51") and special Deck Collar. Hard molded white PVC Mast Boot. *
|
||
|
Mast Boot for Metal Mast 9560 Oval Mast Section: MMO-9560MB: Mast Boot to fit Metal Mast 9560 Oval Mast Section (9.5" x 6.0") and special Pearson Cast Deck Collar. Hard molded white PVC Mast Boot is 2 3/4" high x 11 1/2" long. As used on Pearson 40. SS
|
||
|
Mast Boot for Metal Mast 11070 Oval Section: MMO-11070MB: Mast Boot to fit Metal Mast 11070 Oval Mast Section (11" x 7") and special Pearson Cast Deck Collar. Hard molded white PVC Mast Boot is 2 3/4" high x 13" long x 9" wide. As used on Pearson.
|
||
|
|
||
|
Mast Boot for Metal Mast 8348 Teardrop Section: MMT-8348TMB: Mast Boot to fit Metal Mast 8348 Teardrop shaped Mast Section (8.30" x 4.81") and special Pearson Cast Deck Collar, MM 8348M-DCP. Hard molded white PVC Mast Boot is 2 1/4" high x 10 1/8" long x 6 3/8" wide. As used on Pearson 365, and 39-1.
|
||
|
|
||
|
Mast Boot for Metal Mast 6342R Furling Mast Section: MMF-6342R-MB: Mast Boot to fit Metal Mast 6342R Furling Mast Section (6.3" x 4.25") and special fabricated SS Deck Collar. Hard molded white PVC Mast Boot is 3 1/2" high x 8 1/2" long.
|
||
|
Mast Boot for Metal Mast 7245R Furling Mast Section: MMF-7245R-MB: Mast Boot to fit Metal Mast 7245R Furling Mast Section (7.2" x 4.5") and special fabricated SS Deck Collar. Hard molded white PVC Mast Boot is 3 1/2" high. *M
|
||
|
Mast Boot for Metal Mast 8655R Furling Mast Section: MMF-8655R-MB: Mast Boot to fit Metal Mast 8655R Furling Mast Section (8.6" x 5.5") and special fabricated SS Deck Collar. Hard molded white PVC Mast Boot is 2 5/8" high x 11" long.
|
||
|
Mast Boot for Metal Mast 9760R Furling Mast Section: MMF-9760R-MB: Mast Boot to fit Metal Mast 9760R Furling Mast Section (9.75" x 6") and special fabricated SS Deck Collar. *M
|
||
|
|
||
|
Mast Boot for Morgan 323: Morgan-323MB: Mast Boot to fit Flat Oval Mast Section (7 1/4" x 4 3/4") and Morgan raised Deck Collar. Hard molded white PVC Mast Boot is 3" high x 10" long. As used on Morgan 323.
|
||
| Mast Boot for Morgan 30-2, 312, 322, 333, 512Miz, OI36, & OI37: Morgan-312MB-1: | ||
|
Mast Boot to fit Oval Mast Section (8" x 5") and Morgan raised Deck
Collar. Hard molded white PVC Mast Boot is 3 1/4" high x 11 3/4" long.
As used on some Morgan 30-2, 312, 322, 333, 512Miz, OI36, & OI37's.
|
||
|
Mast Boot for Morgan 335, 36T, 382, & 383: Morgan-335MB: Mast Boot to fit Oval Mast Section (9" x 6 3/8") and Morgan raised Deck Collar. Hard molded white PVC Mast Boot is 3 1/4" high x 12 3/4" long. As used on Morgan 335, 36T, 382, & 383.
|
||
|
|
||
|
Mast Boot for Niagara 31: KS-Niagara-31MB: Mast Boot to fit special Mast Section (7" x 4 1/2") and special Deck Collar used on Niagara 31. Hard molded white PVC Mast Boot is 3 1/4" high x 9 5/8" long x 7 1/8" wide. As used on Niagara 31. flatr
|
||
|
Mast Boot for Niagara 35: KS-Niagara-35MB: Mast Boot to fit Klacko K-30 Mast Section (7.3" x 4 1/2") and special Deck Collar used on Niagara 35. Hard molded white PVC Mast Boot is 3 1/4" high x 10" long x 6 3/4" wide. As used on Niagara 35. Rndend
|
||
|
|
||
|
Mast Boot for Olson 29: BS-Olson-29MB: Mast Boot to fit Ballenger Spars B5031 Mast Section and special Deck Collar used on Olson 29. Hard molded white PVC Mast Boot is 2 3/4" high x 6 1/4" long x 4" wide. As used on Olson 29.
|
||
|
|
||
|
Mast Boots for
Schaefer Spars Mast Sections |
||
|
Mast Boot for Schaefer Spars #170 Mast Section: Sch 170M-MB: Mast Boot to fit Schaefer Spars 170 Mast Section (6 5/8" x 4 5/16") and Schaefer Cast Deck Collar. Hard molded white PVC Mast Boot is 2 3/4" high x 9 1/4" long. As used on some Pearson 32's.
|
||
|
Mast Boot for Schaefer Spars #180 Mast Sections: Sch 180M-MB: Mast Boot to fit Schaefer Spars 180, 181, 185 & 186 Mast Sections (7.148" x 4.5") and Sch 55-49X Cast Deck Collar. Hard molded white PVC Mast Boot is 2 1/2" high x 9 3/8" long x 6 1/2" wide. As used on Santa Cruz 40 and others. 13-40
|
||
| Mast Boot for Schaefer Spars #180 Mast Sections - Special: Sch 180M-MBS: | ||
| Mast Boot to fit Schaefer Spars 180, 181,
185 & 186 Mast Sections (7.148" x 4.5") and
Special Tall Deck Collar. Hard molded white PVC Mast Boot is 3 1/2" high x 8 3/4"
long. AS
|
||
| Mast Boot for Schaefer Spars #180 Mast Sections - Special: Sch 180M-MBH: | ||
|
Mast Boot to fit Schaefer Spars 180, 181, 185 & 186 Mast Sections (7.148" x 4.5") and Hall Spars
and Pearson
Deck Collars with boot lip that is 8 3/4" x 6". Hard molded white PVC Mast Boot is 9" long x 6 1/4"
wide x 2 3/8" high.
x lg colj35
|
||
|
Mast Boot for Schaefer Spars #220 & 221 Mast Sections: Sch 220M-MB: Mast Boot to fit Schaefer Spars 220 & 221 Mast Sections (8.55" x 5.4") and Sch 55-48XQ Cast Deck Collar. Hard molded white PVC Mast Boot is 2 3/4" high x 10 3/4" long. As used on some Catalina 36's.
|
||
|
Mast Boot for Schaefer Spars #220 & 221 Mast Sections: Sch 220M-MBE: Mast Boot to fit Schaefer Spars 220 & 221 Mast Sections (8.55" x 5.4") and special Cast Deck Collar with ears. As used on some Catalina 36's.
|
||
|
Mast Boot for Schaefer Spars #240 Mast Section: Sch 240M-MB: Mast Boot to fit Schaefer Spars 240 Mast Section (9.91" x 6.2") and special Cast Deck Collar. Hard molded white PVC Mast Boot is 12" long 8 1/2" high x 3" high.
|
||
|
Mast Boot for Sound Spars 7747 Oval Mast Section: SS-7747MB: Mast Boot to fit Sound Spar 7747 and 7747T Oval Mast Sections (7.75" x 4.75") and special Pearson Cast Deck Collar. Hard molded white PVC Mast Boot is 2 5/8" high x 10 1/2" long. As used on Pearson 32, and 323.
|
||
|
Mast Boot for Sound Spars 8755 Oval Mast Section: SS-8755MB: Mast Boot to fit Sound Spar 8755 and 8755T Oval Mast Sections (8.75" x 5.5") and special Pearson Cast Deck Collar. Hard molded white PVC Mast Boot is 2 3/4" high x 10 3/4" long x 8" wide. As used on Pearson 36, 419, 424 and 10M.
|
||
|
Mast Boot for Sound Spars 9560 Oval Mast Section: SS-9560MB: Mast Boot to fit Sound Spar 9560 Oval Mast Section (9.5" x 6.0") and special Pearson Cast Deck Collar. Hard molded white PVC Mast Boot is 2 3/4" high x 11 1/2" long. As used on Pearson 40.
|
||
|
|
||
|
Mast Boot for Sparcraft FM-230: FM 230-15B-S: Mast Boot to fit FM-230 Mast Section (6 7/8" x 4 1/16"). Hard molded white PVC Mast Boot is 9" long x 6 1/2" wide x 3" high. 6
|
||
|
Mast Boot for Sparcraft FM-305: FM 305-15B-S: Mast Boot to fit FM-305 Mast Section (7 7/16" x 4 1/16"). Hard molded white PVC Mast Boot is 9" long x 7" wide x 3 1/4" high. 3
|
||
|
Mast Boot for Sparcraft FM-460: FM 460-15B-S: Mast Boot to fit FM-460 Mast Section (8 1/2" x 4 1/2"). Hard molded white PVC Mast Boot is 11" long x 7 1/2" wide x 2 3/4" high. As used on some Tartan 3500's. 6
|
||
|
|
||
|
Mast Boot for Sparcraft I365E Furling Mast: FM I365E-15B-S: Mast Boot to fit I365E Furling Mast Section (7 7/8" x 4 7/8") and Special Deck Collar used by Island Packet. Hard molded white PVC Mast Boot is 10 1/4" long x 7 1/4" wide x 3 1/2" high.
|
||
|
Mast Boot for Sparcraft I365E Furling Mast: FM I365E-15B-IP: Mast Boot to fit I365E Furling Mast Section (7 7/8" x 4 7/8") and Special Deck Collar used by Island Packet. Hard molded white PVC Mast Boot is 3" high x 10 1/4" long x 7 1/4" wide. As used on some Island Packet 320, 365.
|
||
|
|
||
|
Mast Boot for Tartan 27: BS-Tartan-27MB: Mast Boot to fit special Mast Section (6" x 3 1/4") and Oval Deck Collar used on Tartan 27. Hard molded white PVC Mast Boot is 3" high x 7 5/8" long x 4 3/4" wide.
|
||
|
Mast Boot for Tartan Pride 270: BS-Tartan-P270MB: Mast Boot to fit special Mast Section and Deck Collar used on Tartan Pride 270. Hard molded white PVC Mast Boot is 2 3/4" high x 6 7/8" long x 5 1/2" wide.
|
||
|
|
||
|
Mast Boot for Z-Spar 601 Mast Section: Z-601-MB: Mast Boot to fit Z-Spar Z601 Mast Section (8 3/4" x 5 7/16") and Z-601-DC3 Deck Collar (maximum 13 3/8" long x 10 1/4" wide). Hard molded white PVC Mast Boot is 10 1/2" long x 6 1/2" wide x 3 1/4" high. 4
|
||
|
Mast Boot for Z-Spar 701 Mast Section: Z-701-MB: Mast Boot to fit Z-Spar Z701 Mast Section (9 1/8" x 5 11/16") and Special Deck Collar. Hard molded white PVC Mast Boot is 11 1/2" long x 7 1/4" wide x 3" high.
|
MMC | |
|
|
||
|
Mast Boot for Z-Spar 500E Furling Mast: Z-500E-MB-IP: Mast Boot to fit Z-Spar Z500E Furling Mast Section (7 7/8" x 4 7/8") and Special Deck Collar. Hard molded white PVC Mast Boot is 10" long x 6 1/2" wide x 2 1/4" high.
|
MMC | |
|
Mast Boot for Z-Spar 600E Furling Mast: Z-600E-MB3: Mast Boot to fit Z-Spar Z600E Furling Mast Section (8 11/16" x 5 3/16") and Z-600E-DC3 Deck Collar (maximum 13 3/8" long x 10 1/4" wide). Hard molded white PVC Mast Boot is 3" high x 10 1/2" long x 6 1/2" wide.
|
||
|
Mast Boot for Z-Spar 700E Furling Mast: Z-700E-MB6: Mast Boot to fit Z-Spar Z700E Furling Mast Section (9 1/8" x 5 3/8") and Z-700E-DC6 Deck Collar (maximum 13 3/8" long x 10 1/4" wide). Hard molded white PVC Mast Boot is 3" high x 11 1/2" long x 7 1/2" wide. As used on Caliber 40 and others.
|
||
|
Mast Boot for Z-Spar 800E Furling Mast - Small: Z-800E-MB1: Mast Boot to fit Z-Spar Z800E Furling Mast Section (9 9/16" x 5 13/16") and Old-style Small Deck Collar. Hard molded white PVC Mast Boot is 2" high x 10 1/2" long x 7" wide.
|
||
|
Mast Boot for Z-Spar 800E Furling Mast: Z-800E-MB6: Mast Boot to fit Z-Spar Z800E Furling Mast Section (9 9/16" x 5 13/16") and Z-800E-DC6 Deck Collar (maximum 13 3/8" long x 10 1/4" wide). Hard molded white PVC Mast Boot is 3" high x 11 1/2" long x 7 1/2" wide. =850 2850
|
||
|
Mast Boot for Z-Spar 800E Furling Mast & Island Packet: Z-800E-MBIP: Mast Boot to fit Z-Spar Z800E Furling Mast Section (9 9/16" x 5 13/16") and Special Island Packet Deck Collar. Hard molded white PVC Mast Boot is 2 1/4" high x 11" long x 7 1/4" wide. As used on Island Packet. |
||