|
|
3" Spar Cleats |
Spar Cleat - 3" long Spartan: SP-032C:*
Cast Aluminum Cleat is a low-profile design with a narrow base (without hole) suitable for
use with line up to 1/4" diameter. Black Epoxy coated Cleat is 3" long, and
fastens to spar with (2) 5/32" (#8) FH screws on 13/16" centers. Special
as used by Cape Dory Yachts. D |
|
Spar Cleat - 3 1/4" long, Black: K-1617:
Cast Aluminum Cleat is a low-profile design with a narrow base suitable for
use with line up to 5/16" diameter. Black Epoxy coated Cleat is 3 1/4" long,
and fastens to spar with (2) 5/32" (#8) FH screws on 7/8" centers. |
|
Spar Cleat - 3 1/4" long: Sch 70-13X:
Cast Aluminum Cleat is a low-profile design with a narrow base suitable for
use with line up to 5/16" diameter. Black Anodized Cleat is 3 1/4" long, and
fastens to spar with (2) 5/32" (#8) FH screws on 7/8" centers. As K-1617,
above, but with a Black Anodized finish. |
|
|
|
4" Spar Cleats |
Spar Cleat - 4" long: Ken D-10324:*
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable
for use with line up to 3/8" diameter. Black Epoxy coated Cleat is 4" long,
and fastens to spar with (2) 3/16" (#10) FH screws on 1 3/16" centers. |
|
Spar Cleat - 4" long, Black: Sch 70-94:
Spar Cleat - 4" long, Silver: Sch 60-94:
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable for use with
line up to 3/8" diameter. Black, or Clear Anodized Cleat is 4" long, and fastens to spar
with
(2) 3/16" (#10) FH screws on 1" centers. sasp |
|
|
|
5" Spar Cleats |
Spar Cleat - 5" long: Ken D-10325:*
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable
for use with line up to 1/2" diameter. Black Epoxy coated Cleat is 5" long,
and fastens to spar with (2) 7/32" (#12) FH screws on 1 1/2" centers. |
|
Spar Cleat - 5" long, Black: Sch 70-95:
Spar Cleat - 5" long, Silver: Sch 60-95:
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable for use with
line up to 1/2" diameter. Black, or Clear Anodized Cleat is 5" long,
and fastens to spar with (2) 7/32" (#12) FH screws on 1 1/4" centers. |
|
Spar Cleat - 5" long, Silver: MM 60-95XC:
Extruded MetalMast Aluminum Spar Cleat has specially milled base to offset cleat at 10� on a
curved
Spar surface. Low-profile design has a narrow base suitable for use with line up to 7/16"
diameter,
and has a 7/16" hole in base. Anodized Cleat is 5" long, and fastens to spar with (2) 1/4" FH
screws
on 1" centers. |
|
Spar Cleat - 5" long, Black Wilcox-Crittenden: WC 14052-5B:
Spar Cleat - 5" long, Silver Wilcox-Crittenden: WC 14052-5C:
Original Wilcox-Crittenden Cast Marinium Spar Cleat is a low-profile design with a narrow
base
suitable for use with line up to 3/8" diameter. Cleat is 5 1/8" long, and fastens to spar with
(2)
1/4" FH screws on 1 1/4" centers. As used on hundreds of different Sail and Power Boats.
- Limited Availability. 4-8"
|
|
Spar Cleat - 5" long, Silver: PP 60-05XG:
Open Base Aluminum Cleat is suitable for use with line up to 1/2" diameter. Clear anodized Cleat
is 5"
long x (maximum) 15/16" wide x 1 1/8" high (at center), and fastens with (2) 1/4" FH screws on 1
1/8"
centers. Made in Germany. |
|
Spar Cleat - 5" long, Silver: PP 60-05SBXG:
Solid Base Aluminum Cleat is a low-profile design with a narrow base
suitable for use with line up to 7/16" diameter. Clear anodized Cleat is 5"
long x (maximum) 11/16" wide, and fastens with (2) 1/4" FH screws on 1 1/8"
centers. Made in Germany. |
|
|
|
6" Spar Cleats |
Spar Cleat - 6" long Kenyon: D-10326:
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable
for use with line up to 5/8" diameter. Black Anodized Cleat is 6" long, and
fastens to spar with (2) 1/4" FH screws on 1 3/4" centers.
sasch7?
|
|
Spar Cleat - 6" long, Black: Sch 70-96:*
Spar Cleat - 6" long, Silver: Sch 60-96:*
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable for use with
line up to 5/8" diameter. Black, or Clear Anodized Cleat is 6" long, and fastens to spar
with
(2) 1/4" FH screws on 1 1/2" centers. $29. |
|
Spar Cleat - 6" long, Silver Spartan: SP-098C:
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable for use with
line up to 5/8" diameter. Clear Anodized Cleat is 6" long, and fastens to spar
with (2) 1/4" FH screws on 1 1/2" centers. Special as used by Cape Dory
Yachts. - Limited Availability. D
|
|
Spar Cleat - 6" long, Silver Pearson: PP-60-06X:
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable for use with
line up to 1/2" diameter. Clear Anodized Cleat is 6" long, and fastens to spar
with (2) 1/4" FH screws on 1 7/8" centers. Special as used by Pearson
Yachts. - Limited Availability. Ros
|
|
Spar Cleat - 6" long, Black Wilcox-Crittenden: WC 14052-6B:
Spar Cleat - 6" long, Silver Wilcox-Crittenden: WC 14052-6C:
Original Wilcox-Crittenden Cast Marinium Spar Cleat is a low-profile design with a narrow
base
suitable for use with line up to 7/16" diameter. Cleat is 6" long, and fastens to spar with
(2) 1/4" FH screws on 1 5/8" centers. As used on hundreds of different Sail and Power Boats.
- Limited Availability.
|
|
|
|
7" Spar Cleats |
Spar Cleat - 7" long Kenyon: D-10327:
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable
for use with line up to 5/8" diameter. Black Anodized Cleat is 7" long, and
fastens to spar with (2) 5/16" FH screws on 2 1/16" centers. |
|
Spar Cleat - 7" long, Black Spartan: SP-099B:
Spar Cleat - 7" long, Silver Spartan: SP-099C:
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable for use with
line up to 5/8" diameter. Cleat is 7" long, and fastens to spar with (2)
1/4" FH screws on 1 3/4" centers. Special as used by Cape Dory Yachts.
- Limited Availability.
hs&s, as K6
|
|
Spar Cleat - 7" long, Silver Pearson: PP-60-07X:
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable for use with
line up to 5/8" diameter. Clear Anodized Cleat is 7" long, and fastens to spar
with (2) 5/16" FH screws on 1 3/4" centers. Special as used by Pearson Yachts.
- Limited Availability. Ros
|
|
Spar Cleat - 7" long, Black Wilcox-Crittenden: WC 14052-7B:
Spar Cleat - 7" long, Silver Wilcox-Crittenden: WC 14052-7C:
Original Wilcox-Crittenden Cast Marinium Spar Cleat is a low-profile design with a narrow
base
suitable for use with line up to 5/8" diameter. Cleat is 7" long, and fastens to spar with (2)
5/16" FH screws on 1 7/8" centers. As used on hundreds of different Sail and Power Boats.
- Limited Availability.
hs as P6
|
|
|
|
8" Spar Cleats |
Spar Cleat - 8" long, Black: Sch 70-98:
Spar Cleat - 8" long, Silver: Sch 60-98:
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable for use with
line up to 5/8" diameter. Black, or Clear Anodized Cleat is 8" long,
and fastens to spar with (2) 5/16" FH screws on 2" centers. |
|
|
|
10" Spar Cleats |
Spar Cleat - 10" long, Black: Sch 70-90X:
Cast Aluminum Spar Cleat is a low-profile design with a narrow base suitable for use with
line up to 3/4" diameter. Anodized Cleat is 10" long, and fastens to spar with
(2) 3/8" FH screws on 2 1/2" centers. This item is no longer available
and is shown here for identification only. |
|
|
Non-metallic Spar Cleats
We are traditionalists, and prefer the stronger metal (alloy) Cleats for most all
applications.
However, some applications, including some Carbon Spars, are often better served by non-metallic
Cleats.
The Cleats listed below are made of Marelon�, a sturdy
fiberglass
reinforced nylon, with high impact resistance, slight flexibility, and low cost.
|
|
Marelon� Spar Cleat - 3" long: MF 761-3:
Molded Marelon� Cleat has a narrow base and is suitable for
use with line up to 1/4" diameter. Black plastic Cleat is 3" long x (maximum) 1/2" wide x 3/4"
high,
and fastens to spar with (2) 5/32" (#8) FH screws on 1 1/16" centers. D $2.00
|
|
Marelon� Spar Cleat - 4" long: MF 762-4:
Molded Marelon� Cleat has a narrow base and is suitable for
use with line up to 5/16" diameter. Black plastic Cleat is 4" long x (maximum) 9/16" wide x 7/8"
high,
and fastens to spar with (2) 3/16" (#10) FH screws on 1 3/16" centers. D $3.00
|
|
Marelon� Spar Cleat - 5" long: MF 763-5:
Molded Marelon� Cleat has a narrow base and is suitable for
use with line up to 3/8" diameter. Black plastic Cleat is 5" long x (maximum) 11/16" wide x 1
1/8" high,
and fastens to spar with (2) 3/16" (#10) FH screws on 1 7/16" centers. D $5.00
|
|
Marelon� Spar Cleat - 6 1/2" long: MF 764-6.5:
Molded Marelon� Cleat has a narrow base and is suitable for
use with line up to 1/2" diameter. Black plastic Cleat is 6 1/2" long x (maximum) 3/4" wide x 1
5/16"
high, and fastens to spar with (2) 1/4" FH screws on 1 11/16" centers. $6.00
|
|
Marelon� Spar Cleat - 8" long: MF 765-8:
Molded Marelon� Cleat has a narrow base and is suitable for
use with line up to 5/8" diameter. Black plastic Cleat is 8" long x (maximum) 15/16" wide x 1
5/8" high,
and fastens to spar with (2) 1/4" FH screws on 1 15/16" centers. $9.00 |
|
|
|
Downhaul Cleats
|
Downhaul Cleat Ass'y - 3 1/4" long, Black: K-1108:
Aluminum Downhaul Cleat mounts in luff groove of Mast Sections with 1/2" (or larger) Boltrope
Groove.
Unit consists of K-1617-1 3 1/4" Cleat mounted on a 3 1/2" length of 1/2" OD
anodized Aluminum tube.
Tube slides into luff groove, screws are tightened to lock Cleat in desired position.
Long tube with off-center cleat prevents Gooseneck Slide from hitting Cleat. |
|
Downhaul Cleat Ass'y - 4" long, Black: K-1414:
Aluminum Downhaul Cleat mounts in luff groove of Mast Sections with 1/2" (or larger) Boltrope
Groove.
Unit consists of K-10324 4" Spar Cleat mounted on a 3 1/2" length of 1/2" OD
anodized Aluminum tube.
Tube slides into luff groove, screws are tightened to lock Cleat in desired position.
Long tube with off-center cleat prevents Gooseneck Slide from hitting Cleat. |
|
|
| Cleat
Backing Plates |
Cleat Backing Plate, Aluminum: RR 70-BP1:
Anodized Aluminum Cleat Backing Plate is suitable for use with Cleats with up to 3/8" fasteners
and up to 2 3/8"
hole centers. Backing Plate is 3 1/2" long x 1" wide x 1/8" thick, and has (2) slots (3/8" x 1")
on 1 5/8"
centers. Suitable for use with many Spar and Jam Cleats, most Deck Cleats will require two (2)
pieces.
|
|
